Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== SATO QR BARCODES ======

In order to print the new style QR barcode to a SATO label printer, you will need to create a code-based label.

Here is an example that prints a 1-1/8" x 1-1/8" QR code
<note>
<STX>

<ESC>A<ESC>AR<ESC>#E3<ESC>CS4<ESC>Z

<ESC>A

<ESC>H0290<ESC>V0040<ESC>RDB00,P20,P20,SCAN ME

<ESC>H0300<ESC>V0100<ESC>BQ3008,2%%http://wws5.com%%

<ESC>H0210<ESC>V0350<ESC>RDB00,P16,P16,wws5.com

<ESC>Q1

<ESC>Z

<ETX>
</note>

**<STX>** is start-of-transmission

**<ESC>A** is the beginning of a command\\
**<ESC>AR** is standard length\\
**<ESC>#E3** is 3 darkness on a scale of 1 to 3 (you can vary this).\\
**<ESC>CS4** is 4" per second printing \\
**<ESC>Z** is the end of a command.\\

**<ESC>A** is the beginning of a command\\
**<ESC>H0290** is move 290 dots to the right from the leftmost possible edge. (you can vary this).\\
**<ESC>V0040** is move down 40 dots down from the topmost possible edge. (you can vary this).\\
**<ESC>RDB00,P20,P20,SCAN ME** is use a CG Triumvirate font to print the words, "SCAN ME" 20 points wide by 20 points high. (you can vary this).\\

**<ESC>H0300<ESC>V0100** is 300 dots across and 100 dots down. (you can vary this).\\
**<ESC>BQ3008,2%%http://wws5.com%%** is print a QR bar code for the "wws5.com" website. (you can vary this).

**<ESC>H0210<ESC>V0350** is 210 dots across and 350 dots down. (you can vary this).\\
<ESC>RDB00,P16,P16,wws5.com is print "wws5.com" in a 16 point x 16 point font. (you can vary this).

**<ESC>Q1** is print one label.

**<ESC>Z** is end of command.

**<ETX>** is end-of-transmission.