no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== SATO QR BARCODES ======
+In order to print the new style QR barcode to a SATO label printer, you will need to create a code-based label.
+Here is an example that prints a 1-1/8" x 1-1/8" QR code
+<note>
+<STX>
+<ESC>A<ESC>AR<ESC>#E3<ESC>CS4<ESC>Z
+<ESC>A
+<ESC>H0290<ESC>V0040<ESC>RDB00,P20,P20,SCAN ME
+<ESC>H0300<ESC>V0100<ESC>BQ3008,2%%http://wws5.com%%
+<ESC>H0210<ESC>V0350<ESC>RDB00,P16,P16,wws5.com
+<ESC>Q1
+<ESC>Z
+<ETX>
+</note>
+**<STX>** is start-of-transmission
+**<ESC>A** is the beginning of a command\\
+**<ESC>AR** is standard length\\
+**<ESC>#E3** is 3 darkness on a scale of 1 to 3 (you can vary this).\\
+**<ESC>CS4** is 4" per second printing \\
+**<ESC>Z** is the end of a command.\\
+**<ESC>A** is the beginning of a command\\
+**<ESC>H0290** is move 290 dots to the right from the leftmost possible edge. (you can vary this).\\
+**<ESC>V0040** is move down 40 dots down from the topmost possible edge. (you can vary this).\\
+**<ESC>RDB00,P20,P20,SCAN ME** is use a CG Triumvirate font to print the words, "SCAN ME" 20 points wide by 20 points high. (you can vary this).\\
+**<ESC>H0300<ESC>V0100** is 300 dots across and 100 dots down. (you can vary this).\\
+**<ESC>BQ3008,2%%http://wws5.com%%** is print a QR bar code for the "wws5.com" website. (you can vary this).
+**<ESC>H0210<ESC>V0350** is 210 dots across and 350 dots down. (you can vary this).\\
+<ESC>RDB00,P16,P16,wws5.com is print "wws5.com" in a 16 point x 16 point font. (you can vary this).
+**<ESC>Q1** is print one label.
+**<ESC>Z** is end of command.
+**<ETX>** is end-of-transmission.