Receipt printing is not controlled by the POS Device Manager.
Open System Five - Setup Tools - Printing Options - Printer setup Select your receipt Printer in the Left hand window, and in the right hand window, only select slip printer. Leave all other check boxes blank.
Cutting of receipts is also controlled from the Windows printer driver. It is also recommended that you do not use the Generic Text Driver in Windows. Use the correct driver for your printer to ensure that the cutter and cash drawer settings are correct for your specific printer.
Cash Drawers are not controlled by the System Five Slip Printer settings within System Five. They are controlled by the POS Device Manager, and by the Windows driver on the local workstation. Again, please ensure that you are using the correct driver for your printer model, and not the Generic Text Driver, as you will need to make sure the cut codes and cash drawer settings are set in the driver.
Emailing is currently not supported from within the SaaS environment, but programming is currently looking into offering it in the future.
Created by Steve Wind April 28 2016