User Tools

Site Tools


pos_devices_-_opos_drivers

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
pos_devices_-_opos_drivers [2009/06/10 11:19 (15 years ago)] nbainspos_devices_-_opos_drivers [2023/05/10 10:46 (11 months ago)] (current) swind
Line 1: Line 1:
 +<note>The drivers on this page were created for Windows XP and are no longer available from the manufacturer. All links on this page to the required drivers no longer function.</note>
 +\\
 +\\
 ====== Installing OPOS Drivers ====== ====== Installing OPOS Drivers ======
  
 For Point of Sale Devices that use OPOS drivers, there are two sets of drivers that must be installed.\\ For Point of Sale Devices that use OPOS drivers, there are two sets of drivers that must be installed.\\
-  * Generic OPOS Drivers ftp://ftp.windward-ca.com/pub/special/OposCCOs-1_8_001.EXE +  * Generic OPOS Drivers ftp://ftp.windward-ca.com/pub/special/OPOS_Common_Control_Objects.EXE
   * Manufactures OPOS Drivers.   * Manufactures OPOS Drivers.
-It may be nessasary to reinstall the Generic OPOS drivers after installing the Manufatures OPOS Drivers.+It may be nessesary to reinstall the Generic OPOS drivers after installing the Manufatures OPOS Drivers.
 \\ \\
 +
 +
 +====== General Setup in System Five ======
 +
 +  - Log into System Five
 +  - Open POS Device Manager and set the "type" to OPOS
 +  - Under the OPOS Tab we will need to select the Device that is created with the mfg. OPOS drivers
 +  - Under the Debug Sub-Menu we can test to make sure the device is working
 +
 +\\
 +
 +
 ===== Supported OPOS Devices ===== ===== Supported OPOS Devices =====
-The following OPOS devices are supported. In theory all supported devices should work, but not nessasarily.\\+The following OPOS devices are supported. In theory all supported devices should work, but not necessarily.\\ 
 + 
 +[[https://www.windwardsoftware.com/resources/shop-pos-hardware.html|SHOP FOR COMPATIBLE HARDWARE]]
  
 ==== Scanners ==== ==== Scanners ====
Line 13: Line 30:
   * Metrologic MS2020 (scale/scanner), MS9520, MS951   * Metrologic MS2020 (scale/scanner), MS9520, MS951
  
 +
 +
 +==== Scales ====
 +Tested devices 
 +  * Metrologic MS2020
  
 ==Metrologic MS2320 Config== ==Metrologic MS2320 Config==
 * Install Metrologic manufacturer drivers ftp://ftp.metrologic.com/pub/download/Software/OPOSInstall.exe\\ * Install Metrologic manufacturer drivers ftp://ftp.metrologic.com/pub/download/Software/OPOSInstall.exe\\
 * Verify Windward OPOS drivers are installed ftp://ftp.windward-ca.com/pub/special/OPOSInstall.exe\\ * Verify Windward OPOS drivers are installed ftp://ftp.windward-ca.com/pub/special/OPOSInstall.exe\\
-* Install MetrOPOS Admin tool from ftp://ftp.metrologic.com/pub/download/Software/MetrOpos2.2.9.exe+* Install MetrOPOS Admin tool from ftp://ftp.metrologic.com/pub/download/Software/MetrOpos2.2.9.exe\\ 
 +* In the Modify Profile screen, choose MS2020 model, RS232 Port, COM 1,\\ Dual Cable (If more then 1), Device as Scale and Display Yes.\\ 
 + 
 +* Select Detailed Test tab and click "Open, Enable, Claim" and then "Read Weight" Button. <-- Item needs to be on scale to weigh.\\ 
 +* Output = If Timed Out (1000 milliseconds) error then nothing on scale
  
  
-==== Scales ==== 
-Tested devices  
-  * Metrologic MS2020 
 ==== Pole Display ==== ==== Pole Display ====
 Tested devices Tested devices
pos_devices_-_opos_drivers.1244657971.txt.gz · Last modified: 2009/06/10 11:19 (15 years ago) by nbains