User Tools

Site Tools


pos_devices_-_opos_drivers

This is an old revision of the document!


Installing OPOS Drivers

For Point of Sale Devices that use OPOS drivers, there are two sets of drivers that must be installed.

It may be nessasary to reinstall the Generic OPOS drivers after installing the Manufatures OPOS Drivers.

Supported OPOS Devices

The following OPOS devices are supported. In theory all supported devices should work, but not nessasarily.

Scanners

Tested devices

  • Metrologic MS2020 (scale/scanner), MS9520, MS951
Metrologic MS2320 Config

* Install Metrologic manufacturer drivers ftp://ftp.metrologic.com/pub/download/Software/OPOSInstall.exe
* Verify Windward OPOS drivers are installed ftp://ftp.windward-ca.com/pub/special/OPOSInstall.exe
* Install MetrOPOS Admin tool from ftp://ftp.metrologic.com/pub/download/Software/MetrOpos2.2.9.exe

Scales

Tested devices

  • Metrologic MS2020

Pole Display

Tested devices

pos_devices_-_opos_drivers.1244657971.txt.gz · Last modified: 2009/06/10 11:19 (15 years ago) by nbains