Important - each pinpad must be EMV certified with each processor. Just because a pinpad has a chip reader, does not mean that it is EMV certified with any or your processor.

• This device is now EMV certified with Mercury and System Five.
• This device may be purchased or rented from Mercury Payments or must be purchased though IBC
• CHIP / MSR / Contactless /PIN
• No signature capture
• USB 3 meter cables. Serial or 1 USB meter cables are also available.
• XPI Application (Load Version 8.42B)

Installing Mercury Netepay for US-EMV

Most processors now support the Vx805 This is what you need to purchase.

• Verifone VX805 USB (M280-703-A3-WWA-3)
• 3.0M USB Cable Vx805 USB A M (CBL282-038-02-A). Serial or 1M USB cables are also available.
• XPI Application (Load Version 8.42B)
• Processor Encryption (processor-specific)
• This device is not End-To-End Encrypted.
• May be purchased from POS Portal, JRS POS Depot or POSData or IBC. Please see http://www.datacapsystems.com/verifonevx805 for specific ordering information, distributor links and supported processors.

• This device is certified only with Vantiv Integrated Payments and Heartland Host. It is now available for Vantiv Integrated Payments (Mercury).
• Chip / MSR / Contactless / Signature
• USB Device Driver
• dsiEMVx version 1.06 or higher is required.
• System Five version version 6.1.2.155 or higher is required.
• Chip Card returns and voids must be swiped.
• The prompt Debit with Pin? Yes/No is a bit confusing.
  
  • Yes means this is a debit card that requires a PIN,
  • No means this is a credit card.
• The Enter key does not work in response to prompts even though the screen button Yes looks like the enter key.
• Information on ordering this device

• List of Datacap supported Devices These may not be supported by System Five. See second half for EMV Devices.

There be dragoons here - Please read carefully.

• Ensure your PINPad is encrypted for your payment processor.
• Please read the fine print. Not all pinpads will work for all situations. Items to consider:Terminal Services;Serial, USB or TCP/IP;Signature Capture; Card on File.
• Some driver installs may be challenging. Please ensure you have at least 2 weeks lead time before going live.
• US EMV is not supported. Even though your pinpad may have a chip card reader, chances that it will support EMV when available are slim.
• Some PINpads require loading of datacap forms or OPOS drivers by the Supplier or other third party.
• If the PINpad you are considering is not on this list, it probably won't work. Replacement models for obsolete PINpads probably won't work either.
• Beware of purchasing second hand equipment from non-POS vendors.

• New to version 6.0.77
• PCI out of scope, therefore does not support card on file, except with Mercury Tokenization.
• VX810 P/N: M281-503-02-R
• Firmware Required: XPI 4.24A or above
• RS232 Serial (Serial to USB converters will not work).
  • WARNING: USB version is untested so they are unsupported as of 2014-06-13(cm) as per discussion with our programming team.
  • If someone has a tested version of the USB version of this pinpad please let us know so we can consider support for this device.
• PIN Entry - Device must have Debit Keys injected for your processor.
• Terminal Services supported using RS232 Port redirection.
• Datacap dsiPDCX install
• This device is a PED Version 1 PIN Pad which are no longer PCI PED approved.

Ordering instructions from JR's POS Depot (http://www.jrposdepot.com):
------------------------------------------
The Vx810 is supported in the US with the dsiPDCX integration. When 
ordered it needs to be specified that it is for the US with PDCX and 
needs the Debit key for your payment processor as well.  

• New to version 6.0.77
• PCI out of scope, therefore does not support card on file except with Mercury Tokenization.
• Signature Capture
• Magnetic Stripe Reader
• PIN Entry - Device must have Debit Keys injected for your processor
• Optional NFC (MasterCard Paypass, Visa payWave, ApplePay) depending on your processor's ability to process NFC transactions.
• Must be loaded with Datacap forms, Purchase from JR's POS Depot, or POSData (see below) with forms, or you will need to ship the device to datacap systems for loading of the forms.
• Chip Reader - not currently capable of EMV transactions.
• USB or RS232 Serial
• Datacap dsiPDCX install
• Configuring datacap dsiPDCX Devices
• Does not work with Terminal Services Serial Port redirection, but can be used with the Remote POS device manager available in System Five version 6.1

• Available in System Five version 6.0.82.116
• PCI out of scope, therefore does not support card on file except with Mercury Tokenization.
• Signature Capture
• Magnetic Stripe Reader
• PIN Entry - Device must have Debit Keys injected for your processor
• Chip Reader - not currently capable of EMV transactions.
• RS232 or USB
• Must be loaded with Datacap forms, Purchase from JR's POS Depot, or POSData (see below) with forms, or you will need to ship the device to datacap systems for loading of the forms.
• Datacap dsiPDCX install
• Configuring datacap dsiPDCX Devices
• Support for Terminal Services serial port redirection has not been tested on Wide area networks. System Five version 6.1. supports the Remote Windward POS Device manager.
• Contactless payments requires dsiPDCX 1.38 or higher and may only work with some processors. If your processor supports contactless, ensure your merchant account is setup for contactless.
• The mx915 is a bit slower than the Equinox L5300.

• New to version 6.0.77
• PIN Entry - Device must have Debit Keys injected for your processor
• Integrated track 1 and 2 Magnetic Stripe Reader
• Signature Capture Pad
• Color Display
• USB-HID
• USB-COM
• Powered USB (Large double USB Port with separate power plug)
• Serial/RS-232 (COM Port) - Use with Local Terminal Services
• TCP/IP Use with Terminal Services
• UPOS/OPOS Version 2.91
• Driver installation can be challenging.
• This device is no longer being manufactured.
• This device is a PED Version 1 PIN Pad which are no longer PCI PED approved.

• PINPad Only
• Requires separate MSR
• Serial/RS-232 (COM Port) (Does not work with Terminal Services)

Do not use a USB-Serial connnector. You need a true serial port.

• New to version 5.41
• PINPad
• Integrated track 1 and 2 MSR
• Signature Capture Pad
• Monochrome Display
• USB-HID
• USB-COM
• Powered USB (Large double USB Port with separate power plug)
• Serial/RS-232 (COM Port) - Use with Local Terminal Services
• TCP/IP Use with Terminal Services
• UPOS/OPOS 2.91
• Drivers ftp://ftp.windward-ca.com/pub/special/ingenico_s5.zip
• :!:Driver installation can be challenging.
• This device has been End of Life'd but may be still available refurbished.
• This device is a PED Version 1 PIN Pad which are no longer PCI PED approved.

• New to version 5.41
• PINPad
• Integrated track 1 and 2 MSR
• Signature Capture Pad
• Large Color Display
• USB-HID
• USB-COM
• Powered USB (Large double USB Port with separate power plug)
• Serial/RS-232 (COM Port) - Use with Terminal Services
• TCP/IP Use with Terminal Services
• UPOS/OPOS 2.91
• Drivers ftp://ftp.windward-ca.com/pub/special/ingenico_s5.zip
• Driver installation can be challenging.
• This device has been End of Life'd but may be still available refurbished.
• This device is a PED Version 1 PIN Pad which are no longer PCI PED approved.

The pinpad device may be mounted on a flat surface, wall, or customer stand (recommended). We recommend physically securing the device to avoid theft. Power may be provided from a host Point of Sale system or from an Ingenico power supply. The device must be placed close to an easily-accessible power outlet. Do not place the pinpad on a PC monitor, adjacent to an electronically active security tag deactivation system, or near other sources of magnetic fields.

Products Mercury Payment Systems can provide in the USA:

• Stand Alone Credit Card Terminals.
• Dial Backup Bridge.

You can purchase PINpads for the United States of America from the following sources.

JR's POS Depot
Contact:  Luisa Rodas
TEL (954) 741-3433, x130
TOL (877) 999-7374
FAX (253) 238-2414
http://jrposdepot.com
[email protected]

POS DATA
Contact:  Becky O'Brien, Regional Business Development Manager
TEL   310-883-8340
eMail [email protected]
web   http://www.posdata.com

If you are considering purchasing second hand equipment from other than a POS vendor, please be aware that:
It may be compromised (hacked)
The MSR and keys may be worn.
You will have to send it somewhere to have the correct firmware, forms and encryption keys loaded.
It may no longer be PCI compliant.

• Supported USA PINPads
• EMV-US options
• Supported Canadian Global PINPads
• Supported Canadian Moneris PINPads
• Supported Canadian Paymentech PINPads
• Supported Canadian Desjardins PINPads
• Contactless Payments