Differences

This shows you the differences between two versions of the page.

--- paymentech_pinpads [2017/12/06 09:53 (6 years ago)] – craig
+++ paymentech_pinpads [2019/05/13 16:24 (5 years ago)] – [verifone Vx820 Contactless] craig
@@ Line 3: / Line 3: @@
 ===== verifone Vx820 Contactless=====
-  * This device may be available, please contact us.
+  * This device is now available.
+  * Requires
+     * Vx820 XPI 12.08.16
+     * Netepay 5.06.10
+     * DSIEMVClientX® 1.27
+     * SystemFive version 6.2.2.262 or higher to support manual entry with CVV
+<note warning>The Canadian VX810/820 pinpads are **RS-232 Serial only**. You need a 9 PIN RS-232 Serial port on the back of your computer. **USB-Serial converters DO NOT WORK. I repeat, they DO NOT WORK**. They are also expensive for ones that may work. If you do not have a serial card, you can have one installed. The Edge USB-Serial converter is the only known one that works, but please don't waist your money and time on it when a serial port card can be installed for a third of the cost.</note>
@@ Line 13: / Line 20: @@
 {{faq:payment_processing_setup:vx810.jpg|}}
-===== verifone SC5000 =====
+<note important>This version will no longer support manual entries of card numbers as Chase now requires the CVV number</note>
-:!:**THIS PINPAD DOES NOT SUPPORT EMV CHIP AND PIN CARDS**:!:\\
-This pinpad is available from Paymentech Canada\\
-{{verifonesc-5000.jpg|}}\\
-Set the 3 digit terminal id in the Pinpad ID.\\
-Ensure you are running the very latest version of [[http://www.datacapepay.com/software/dsiclient/|dsi client]] on all stations, curently 3.84.\\
-New units are being shipped with a new firmware. Ensure your version of System Five supports the SC5000 V2 for compatibility.\\
-The paymentech device driver has not been tested on Terminal Services.\\
-RS-232 Serial connection only (USB-Serial connectors do not work)\\