User Tools

Site Tools


motorola_ds4208_2d_scanner

Configure Motorola DS4208 for 1D/2D scanning

1. The device just needs to emulate as a Com Port Device. Download the install the Virtual Com Port driver.

https://portal.motorolasolutions.com/Support/US-EN/Resolution?solutionId=5201&redirectForm=search&searchQuery=%3FsearchType%3Dsimple%26searchTerm%3DCDC

2. Print and Scan USB CDC Host barcode

Download File: usb_cdc_host.doc

3. Go to the Windows Device Manager and you should see the COM PORT for the device in there. Take note of the com port number as you will be needing it for the setup.

4. Open WindwardPOS Device Manager, should be on the System Tray. Switch to Barcode Scanner tab and select the Com Port assigned to the scanner.

NOTE: The device no longer requires the preamble as System Five can now determine that the device is a Barcode Scanner and monitoring the com port.

motorola_ds4208_2d_scanner.txt · Last modified: 2016/07/21 07:24 by cserranillo