Differences

This shows you the differences between two versions of the page.

--- loading_cipherlab_program_on_metrologic_sp5500 [2012/06/06 22:19 (12 years ago)] – 119.225.209.134
+++ loading_cipherlab_program_on_metrologic_sp5500 [2014/11/20 16:36 (10 years ago)] (current) – [Loading the Cipher Labs runtime onto Metrologic sp5500 PDT] swingett
@@ Line 4: / Line 4: @@
 **Prerequisites for the instructions below are as follows:**
-  * USB cradles are installed and working correctly.
+  * USB cradles are installed and working correctly. (See [[http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx|HERE]] for the cradle driver.)
   * If using a USB cradle, the serial port installed for this cannot be higher than COM 8.
@@ Line 21: / Line 21: @@
   * Open your Windows Explorer, browse to where the files have been extracted and run the IRLoad.exe program.
-{{  loading_cipherlab_program_on_metrologic_sp5500-001.jpg|Content of the zip file after extraction  }}
+{{loading_cipherlab_program_on_metrologic_sp5500-001.jpg|Content of the zip file after extraction  }}
   * Use the Open dialog box to browse to where the U8000-2510.SHX file has been extracted. Select the file and click Open
-{{  loading_cipherlab_program_on_metrologic_sp5500-002.jpg|Browse dialog for the IR_Load application  }}
+{{loading_cipherlab_program_on_metrologic_sp5500-002.jpg|Browse dialog for the IR_Load application  }}
   * Use the Com Port Properties window to select the serial port the Metrologic sp5500 cradle is installed on and the baud rate that the serial port is set to.
@@ Line 31: / Line 31: @@
 <note important> The IRLoad.exe program is only capable of connecting to COM1 to COM8.</note>
-{{  loading_cipherlab_program_on_metrologic_sp5500-003.jpg|Port and baud selection for loading  }}
+{{loading_cipherlab_program_on_metrologic_sp5500-003.jpg|Port and baud selection for loading  }}
   * Click OK to have the runtime downloaded to the handset. When this is complete, a question appears asking if another program is to be loaded. Select no to this question.