User Tools

Site Tools


Honeywell Xenon 1900 2D Barcode Scanner Setup and Configuration

This device just needs to emulate a Com Port to work with System Five.

1. Download & Install the HSM USB Serial Driver ver 3.4.8 from the Honeywell's site.

2. Print the Document File below and scan “USB Serial” barcode.

Downlaod File: usb_serial.doc


Found on Page 6:

3. Go the Windows Device Manager and take note of the Com Port Number assigned to the device

4. Open WindwardPOS device manager / switch to Barcode Scanner tab and set the com port.

honeywell_xenon_1900_2d_barcode_scanner.txt · Last modified: 2016/07/21 08:44 by cserranillo