Windward Software Wiki

This is an old revision of the document!

honeywell_3800g_-_ctrl_b_preamble.pdf

Print the PDF file above and scan the barcode

This is a single barcode scan to enable the Ctrl+B prefix otherwise known as the STX prefix.

It has been tested to work with the 3800g as well as the 1452G

Now go to System5 / Setup Wizard / Point of Sale Devices / Barcode Reader

1. Click on “Now Scan Barcode” button
2. Scan any Item with a barcode
3. Click “Save Settings” button
4. Click “CLOSE” button on top to exit

Created by Steve Wind February 19 2016