User Tools

Site Tools


faq:using_barcode_scanners_with_windows_terminal_services

This is an old revision of the document!


Problem

CTRL+B character (STX Prefix) is not transmitted when scanning a barcode from a client connected via Windows RDP

Solution

Ensure that the client has the “Apply Windows Key Combinations” enabled for the local computer.

Once set, opening a CMD prompt on the Terminal Server via a RDP connection and scanning a barcode with a properly configured scanner will produce the following output:

faq/using_barcode_scanners_with_windows_terminal_services.1180480737.txt.gz · Last modified: 2007/05/29 16:18 (17 years ago) by bob