Differences

This shows you the differences between two versions of the page.

--- faq:ibc_equipment_setup [2019/11/07 08:52 (5 years ago)] – [POS Tablet ION-TAB8-Z4UG] craig
+++ faq:ibc_equipment_setup [2019/11/07 09:04 (5 years ago)] – [POS Tablet ION-TAB8-Z4UG] craig
@@ Line 171: / Line 171: @@
 ===== POS Tablet ION-TAB8-Z4UG =====
-Setup Scanner as [[https://www.zebra.com/us/en/support-downloads/knowledge-articles/evm/emulating-a-com-serial-port-over-usb-using-cdc-driver.html|USB-COM]]\\
+  * Setup the Zebra embedded Scanner as instructed here. [[https://www.zebra.com/us/en/support-downloads/knowledge-articles/evm/emulating-a-com-serial-port-over-usb-using-cdc-driver.html|USB-COM]].
-This will create a Virtual USB-Serial Port in the device manager.\\
+  * There is no article on reverting so don't do this willy-nilly. There is a barcode to revert, but you will have to contact POS-X support to get it.
-Select this serial port in the POS Device Manger.\\
+  * This will create a Virtual USB-Serial Port in the device manager.
+  * Select this serial port in the POS Device Manger.
 ===== HP ElitePad with Retail Jacket (Beta - not currently supported) =====
   * This tablet is a W8 tablet with MSR and barcode scanner.