faq:ibc_equipment_setup
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
faq:ibc_equipment_setup [2017/02/01 13:59 (7 years ago)] – swind | faq:ibc_equipment_setup [2018/02/08 17:29 (6 years ago)] – pwright | ||
---|---|---|---|
Line 28: | Line 28: | ||
\\ | \\ | ||
- | ===== Poll Display 8200USB ===== | + | ===== Pole Display 8200USB ===== |
- | The Poll display is USB but will emulate as a serial device once the drivers are installed. First, download and install the 8200-USB driver which will allow you to configure the port settings to be used for the device. Once installed, download and extract the 8200-2200.zip file and run the VFD_Setup.exe file. This will allow you to set the Poll Display in a number of different configuration settings. We recommend setting the Poll display to be in DSP-800 mode. The user can load the 8200-DSP-800.vfd file which will pre-set the settings required for the DSP-800: | + | The Pole display is USB but will emulate as a serial device once the drivers are installed. First, download and install the 8200-USB driver which will allow you to configure the port settings to be used for the device. Once installed, download and extract the 8200-2200.zip file and run the VFD_Setup.exe file. This will allow you to set the Pole Display in a number of different configuration settings. We recommend setting the Pole display to be in DSP-800 mode. The user can load the 8200-DSP-800.vfd file which will pre-set the settings required for the DSP-800: |
- | Once the settings have been downloaded to the device, the WindwardPOS device manager can be set to use the DSP-800 as the Poll display. | + | Once the settings have been downloaded to the device, the WindwardPOS device manager can be set to use the DSP-800 as the Pole display. |
\\ | \\ |
faq/ibc_equipment_setup.txt · Last modified: 2020/06/02 09:57 (4 years ago) by kevin