User Tools

Site Tools


faq:ibc_equipment_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
faq:ibc_equipment_setup [2017/02/01 13:52 (7 years ago)] swindfaq:ibc_equipment_setup [2018/02/08 17:29 (6 years ago)] pwright
Line 28: Line 28:
 \\ \\
  
-===== Poll Display 8200USB ===== +===== Pole Display 8200USB ===== 
-The Poll display is USB but will emulate as a serial device once the drivers are installed. First, download and install the 8200-USB driver which will allow you to configure the port settings to be used for the device. Once installed, download and extract the 8200-2200.zip file and run the VFD_Setup.exe file. This will allow you to set the Poll Display in a number of different configuration settings. We recommend setting the Poll display to be in DSP-800 mode. The user can load the 8200-DSP-800.vfd file which will pre-set the settings required for the DSP-800:+The Pole display is USB but will emulate as a serial device once the drivers are installed. First, download and install the 8200-USB driver which will allow you to configure the port settings to be used for the device. Once installed, download and extract the 8200-2200.zip file and run the VFD_Setup.exe file. This will allow you to set the Pole Display in a number of different configuration settings. We recommend setting the Pole display to be in DSP-800 mode. The user can load the 8200-DSP-800.vfd file which will pre-set the settings required for the DSP-800:
    
  
-Once the settings have been downloaded to the device, the WindwardPOS device manager can be set to use the DSP-800 as the Poll display.+Once the settings have been downloaded to the device, the WindwardPOS device manager can be set to use the DSP-800 as the Pole display.
  
 \\ \\
Line 38: Line 38:
 ===== Mag Stripe Reader MSR ===== ===== Mag Stripe Reader MSR =====
  
-<note important> Please ensure that this is a POS-X mag stripe reader and not the mag stripe reader that is mounted on the ELO Touch Screens. These setup instructions are ONLY for the POS-X mag stipe reader. the ELO configuration utility can be downloaded here : \\ +<note important> Please ensure that this is a POS-X mag stripe reader and not the MagTek mag stripe reader that is mounted on the ELO Touch Screens. \\ 
- http://media.elotouch.com/support/files/utility/mt_msr_config.zip \\+These setup instructions are ONLY for the POS-X mag stipe reader. \\ 
 +The ELO configuration utility can be downloaded here : \\ 
 +http://media.elotouch.com/support/files/utility/mt_msr_config.zip \\
 We do not have a configuration file for these mag stripe readers. We do not have a configuration file for these mag stripe readers.
 </note> </note>
faq/ibc_equipment_setup.txt · Last modified: 2020/06/02 09:57 (4 years ago) by kevin