Windward Software Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Cherry USB Keyboard Setup =====
Windward Instructions for Cherry USB keyboards.  This document courtesy of Cherry Support. For PS/2 Cherry settings please refer to Cherry PS-2 Keyboard configuration.

  - Open Cherry Tools Designer
  - Choose “Modify Active Configuration” 
  - Select the Magnetic Card tab 
  - Select Track 1 
  - Make sure the Track 1 Header and Terminator are enabled 
  - Click on Edit or Create for the Track 1 Header 
  - Put a checkmark in the “Show Upcode” box 
  - Hold down the Shift key then press and release the % (5)key and then release the Shift key 
  - You should see the following in the text box: Shift 5 ^5 ^Shift 
  - Click the OK button 
  - Click on Edit or Create for the Track 1 Terminator 
  - Put a checkmark in the “Show Upcode” box 
  - Hold down the Shift key then press and release the ? (/) key then release the Shift key 
  - You should see the following in the text box: Shift / ^/ ^Shift
  - Click the OK button 
  - Select Track 2 
  - Make sure the Track 2 Header and Terminator are enabled 
  - Click on Edit or Create for the Track 2 Header 
  - Put a checkmark in the “Show Upcode” box 
  - Press and release the ; key 
  - You should see the following in the text box: ; ^ ; 
  - Click the OK button 
  - Click on Edit or Create for the Track 2 Terminator 
  - Put a checkmark in the “Show Upcode” box
  - Hold down the Shift key then press and release the ? (/) key then release the Shift key then press and release the Enter key that is above the Shift key 
  - You should see the following in the text box: Shift / ^/ ^Shift ¿ ^ ¿ 
  - Click the OK button 
  - Click on Download or Activate in the toolbar 


See also
[[faq:credit_card_swipe_format]]