User Tools

Site Tools


datamax_dmx-e-4204_printer_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
datamax_dmx-e-4204_printer_setup [2018/07/11 10:18]
swind
datamax_dmx-e-4204_printer_setup [2018/07/11 10:22] (current)
swind
Line 204: Line 204:
 ====== Other Helpful Variables ====== ====== Other Helpful Variables ======
  
-,-1   ​Tells the printer to print the entire field.+,-1     ​Tells the printer to print the entire field.
  
-,X    Where X= a specific numerical value, limits how many characters to print (,35 would mean up to 35 characters. ,15 would be 15 etc.).+,X      Where X= a specific numerical value, limits how many characters to print (,35 would mean up to 35 characters. ,15 would be 15 etc.). 
 + 
 +<​STX>​e ​ Select Edge Sensor. This command enables transmissive (see-through) sensing for top-of-form detection of die-cut, and holed (or notched) media. This Media Sensor will detect a minimum gap of 0.1 inches (2.5 mm) between labels (see the Operator’s Manual for media requirements). Syntax: <​STX>​e
  
  
datamax_dmx-e-4204_printer_setup.txt · Last modified: 2018/07/11 10:22 by swind