Differences

This shows you the differences between two versions of the page.

--- datalogic_quickscan_2d [2018/07/24 13:46 (6 years ago)] – swind
+++ datalogic_quickscan_2d [2018/09/07 09:30 (6 years ago)] – swind
@@ Line 1: / Line 1: @@
-====== Datalogic QuickScan (2D Models) ======
+{{ :barcodescan:820055914_tom.pdf |}}====== Datalogic QuickScan (2D Models) ======
@@ Line 62: / Line 62: @@
 Once this is done, no other configurations are necessary.
 In this configuration, the STX Prefix is not needed. System Five and the POS Device Manager will be monitoring that port for activity.
+====== Removing Leading And Trailing Digits From UPC Barcodes ======
+<note important> Removing digits from the UPC barcodes is not recommended. However, in some very specific cases this could be done.
+Be aware that if you do this, it will do it for all barcodes going forward, and all barcodes scanned previously with the first and last digits attached will not scan anymore.
+So you MUST be absolutely sure that you need to do this. </note>
+Print the following document and scan the highlighted 2D barcodes in the numerical order specified.
+{{ :barcodescan:820055914_tom.pdf |}}