User Tools

Site Tools


datacap_dsipdcx_devices

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Last revisionBoth sides next revision
datacap_dsipdcx_devices [2017/02/23 15:11 (7 years ago)] – [Windward System Five support the following dsiPDCX devices] craigdatacap_dsipdcx_devices [2018/01/26 09:57 (6 years ago)] – [Install the Driver (L5300 USB only)] craig
Line 28: Line 28:
   - **You must have your supplier install the datacap forms before they ship it to you.   - **You must have your supplier install the datacap forms before they ship it to you.
 ** **
-===== VeriFone MX915 (beta) =====+  - This device is now available for Vantiv IP EMV 
 +===== VeriFone MX915 =====
 <note important>You must have your supplier install/load the __datacap forms__ and the __debit encryption keys__ before they ship it to you.</note> <note important>You must have your supplier install/load the __datacap forms__ and the __debit encryption keys__ before they ship it to you.</note>
 +<note warning>This device will not support datacap EMV so not recommended.</note>
   * RS232 Serial does not require a driver. DO NOT ORDER the IO block 132-601-00-R which as 3 serial ports, the third serial port which has the 9 PIN connector will not work.   * RS232 Serial does not require a driver. DO NOT ORDER the IO block 132-601-00-R which as 3 serial ports, the third serial port which has the 9 PIN connector will not work.
   * USB driver will download from Microsoft update and create a virtual Serial Port. Some configuration of the device may be necessary, If you press keys 1, 5, 9 simultaneously, FormAgent will stop and the System Mode menu will be displayed.  You will need your password. Press tab Administration, then tab Config and Configuration File - config.usr1.  You need to scroll down to "commtype' Select this parameter and change it from RS232 to USB. Then press Enter.  The field below this 'CP' is the I/O block comport (not the computer com port). You may need to change this depending on which comport you are using on the MX915.  Select Home again at the top and press the Reboot button. USB driver can also be downloaded from [[http://www.datacapepay.com/verifone/]]   * USB driver will download from Microsoft update and create a virtual Serial Port. Some configuration of the device may be necessary, If you press keys 1, 5, 9 simultaneously, FormAgent will stop and the System Mode menu will be displayed.  You will need your password. Press tab Administration, then tab Config and Configuration File - config.usr1.  You need to scroll down to "commtype' Select this parameter and change it from RS232 to USB. Then press Enter.  The field below this 'CP' is the I/O block comport (not the computer com port). You may need to change this depending on which comport you are using on the MX915.  Select Home again at the top and press the Reboot button. USB driver can also be downloaded from [[http://www.datacapepay.com/verifone/]]
datacap_dsipdcx_devices.txt · Last modified: 2020/06/02 09:54 (4 years ago) by kevin