User Tools

Site Tools


checking_file_trust_issues

This is an old revision of the document!


Checking File Trust On System Five Startup

If you are receiving the Not Code Signed messages, there is a simple fix for this.

  1. Go to start menu and click run
  2. Run CMD
  3. Go to the location of the systemfive.exe in question
    • (Windows XP) type the following command and hit enter: C:\Location\Of\SystemFive.exe /regserver
    • (Windows 7) type the following command and hit enter: C:\Location\Of\SystemFive.exe /regsvr

Created by Les Cordell 04/18/2012

OCXfiles.zip and outdated file errors on startup of System five

If you are receiving OCX errors when system five does a File Trust Check 1. Make note of where the files are located….(write it down for later use)..eg c:/S5Demo/bin/Ocxfiles.zip as shown in error window.

2.Exit System 5

3.Copy a clean Ocxfiles.zip from network….try to use most current build but doesnt look vital to success.

4.Browse to location of existing Ocx….refer to step 1

5.Delete Ocxfiles.zip and paste new clean copy of Ocxfiles.zip that you got from network into same folder

6.Restart System5…you should get a message that says it updated

7.Close System5 and reopen…..there should not be anymore error messages.

checking_file_trust_issues.1357949742.txt.gz · Last modified: 2013/01/11 16:15 (11 years ago) by jgrieve