User Tools

Site Tools


cebu_vlan_20

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
cebu_vlan_20 [2013/09/13 08:05]
rbilbao
cebu_vlan_20 [2013/09/13 08:11] (current)
rbilbao
Line 1: Line 1:
-When phone is reported to be down: +empty page
- +
-Please check status of the Asterisk Server.  +
- +
-Also, ensure that there is traffic on Vlan 20 (eth5) on the Mikrotik Router. +
- +
-do ifconfig on 172.17.10.250 +
- +
-root@pbx:~ $ ifconfig +
-eth0      Link encap:​Ethernet ​ HWaddr 00:​25:​90:​52:​B4:​B9 +
-          inet addr:​172.17.10.250 ​ Bcast:​172.17.255.255 ​ Mask:​255.255.0.0 +
-          inet6 addr: fe80::​225:​90ff:​fe52:​b4b9/​64 Scope:​Link +
-          UP BROADCAST RUNNING MULTICAST ​ MTU:​1500 ​ Metric:1 +
-          RX packets:​4483054 errors:0 dropped:0 overruns:0 frame:0 +
-          TX packets:​112656 errors:0 dropped:0 overruns:0 carrier:0 +
-          collisions:​0 txqueuelen:​1000 +
-          RX bytes:​412306709 (393.2 MiB)  TX bytes:​94620105 (90.2 MiB) +
-          Interrupt:​233 Memory:​fba00000-fba20000 +
- +
-eth1      Link encap:​Ethernet ​ HWaddr 00:​25:​90:​52:​B4:​B8 +
-          inet6 addr: fe80::​225:​90ff:​fe52:​b4b8/​64 Scope:​Link +
-          UP BROADCAST RUNNING MULTICAST ​ MTU:​1500 ​ Metric:1 +
-          RX packets:​3614677 errors:0 dropped:0 overruns:0 frame:0 +
-          TX packets:​331853 errors:0 dropped:0 overruns:0 carrier:0 +
-          collisions:​0 txqueuelen:​1000 +
-          RX bytes:​304060411 (289.9 MiB)  TX bytes:​72066623 (68.7 MiB) +
-          Interrupt:​201 Memory:​fb900000-fb920000 +
- +
-eth1.20 ​  Link encap:​Ethernet ​ HWaddr 00:​25:​90:​52:​B4:​B8 +
-          inet addr:​172.17.20.5 ​ Bcast:​172.17.20.255 ​ Mask:​255.255.255.0 +
-          inet6 addr: fe80::​225:​90ff:​fe52:​b4b8/​64 Scope:​Link +
-          UP BROADCAST RUNNING MULTICAST ​ MTU:​1500 ​ Metric:1 +
-          RX packets:​580092 errors:0 dropped:0 overruns:0 frame:0 +
-          TX packets:​331841 errors:0 dropped:0 overruns:0 carrier:0 +
-          collisions:​0 txqueuelen:​0 +
-          RX bytes:​82335904 (78.5 MiB)  TX bytes:​72062519 (68.7 MiB) +
- +
-ham0      Link encap:​Ethernet ​ HWaddr 32:​20:​6C:​F5:​C1:​A7 +
-          inet addr:​5.54.253.199 ​ Bcast:​5.255.255.255 ​ Mask:​255.0.0.0 +
-          UP BROADCAST RUNNING MULTICAST ​ MTU:​1200 ​ Metric:1 +
-          RX packets:0 errors:0 dropped:0 overruns:0 frame:0 +
-          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 +
-          collisions:​0 txqueuelen:​500 +
-          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) +
- +
-lo        Link encap:Local Loopback +
-          inet addr:​127.0.0.1 ​ Mask:​255.0.0.0 +
-          inet6 addr: ::1/128 Scope:​Host +
-          UP LOOPBACK RUNNING ​ MTU:​16436 ​ Metric:1 +
-          RX packets:​5044 errors:0 dropped:0 overruns:0 frame:0 +
-          TX packets:​5044 errors:0 dropped:0 overruns:0 carrier:0 +
-          collisions:​0 txqueuelen:​0 +
-          RX bytes:​429022 (418.9 KiB)  TX bytes:​429022 (418.9 KiB) +
- +
- +
-Phone Proxy Server is at 172.17.20.5,​ thus if eth1.20 is down +
- +
-issue the following commands: +
- +
-vconfig add eth1 20 +
-ifconfig eth1.20 172.17.20.5 netmask 255.255.255.0 broadcast 172.17.20.255 up +
- +
-To Check the Network Status +
- +
-root@pbx:~ $ service network status +
- +
-and it should say this way: +
- +
-Configured devices: +
-lo eth0 eth1 eth1.20 +
- +
-Currently active devices: +
-lo eth0 eth1 ham0 eth1.20@eth1 +
- +
- +
cebu_vlan_20.txt · Last modified: 2013/09/13 08:11 by rbilbao